Getting started

Always check the datasheet before using a component in this kit. This quickstart guide is only for reference and only you are responsible for all and any consequences of using this kit.

As you have already found this guide we can safely assume you have already opened the case and have peeked inside already. Your kit should look something like this:

General overview of the kit

The kit consists of a few categories of modules and components. The microcontroller/breadboard modules, the sensors/actuators and the electrical components. The microcontroller/breadboard components are there to help you prototype. They can for example be used to program your microcontroller or supply power to your components. Lastly, there are some accessories for the ADALM2000.

The sensors and actuators allow you to interface between the real world and the electrical world. These can be used in combination with the electrical components and the microcontroller to interface with the world.

Lastly, the electrical components help you build the systems you design. Whether you need to amplify, illuminate or time, the components you need are in here.

Make sure to prepare the adapter PCBs for the ADALM2000 as you will need those to connect the ADALM2000 to your breadboard! Instructions to do so are found in the ADALM2000 Accessories Section.